Download Now
Gigabyte GV-AP64D ATI Graphics Driver

Free drivers for Gigabyte GV-AP64D-H. Found 5 files for Windows XP, Windows XP Download Gigabyte GV-AP64D-H ATi Catalyst v driver Radeon HD series and the series before Radeon HD series. Drivers for vga atiradeon mb ddr - ATI Gigabyte Radeon Video Card MB DDR AGP8x VGA/TVout, Retail Package Graphic. I. AGP 4X. Graphics Chip. Vendor. n-VIDIA. ATI. SiS. For the latest updates of the supported AGP VGA cards list, please visit Gigabyte GV-AP64D-H. Gigabyte.


Type: Driver
274 (3.22)
Downloads: 12
File Size: 21.9Mb
Supported systems: Windows 10, Windows 8.1, Windows 7
Price: Free* [*Free Registration Required]

Download Now
Gigabyte GV-AP64D ATI Graphics Driver

Please refer to the table below for the details. CD1 Black 11 1. Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it.

Gigabyte AP64D-H graphics card - Radeon 8500 - 64 MB

Pre-installation Precautions Take note of the following precautions before you install motherboard components or change any motherboard settings. Unplug the power cord from the wall socket before touching any component. To avoid damaging the motherboard components Gigabyte GV-AP64D ATI Graphics to static electricity, NEVER place your motherboard directly on the carpet or the like.

Also remember to use a grounded wrist strap or touch a safety grounded object before you handle components. Hold components by the edges and do not touch the ICs. Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that comes with Gigabyte GV-AP64D ATI Graphics component.

Содержимое каталога

Before you install or remove any component, ensure that the power is switched off or the power cord is detached from the power supply. Unlock the socket by lifting the lever up to a 90 Gigabyte GV-AP64D ATI Graphics. Position the CPU directly above the socket such that its marked corner matches the base of the socket lever.

Carefully insert the CPU into the socket until it fits in place. The CPU fits only in one correct orientation. The lever clicks on the side tab to indicate that it is locked. Thermal grease between the CPU and the heatsink is also needed to improve heat dissipation.


Make sure that the CPU and the heatsink are securely fastened and in good contact with each other. For proper installation, please kindly refer to the instruction manuals of the CPU fan and heatsink vendors.

Каталог товаров

Please make sure to disconnect power supply before adding or removing DIMMs or the system components. Unlock a DIMM slot by pressing the retaining clips outward. Before installing the expansion card, please make sure that the power supply is switched off or the power cord is unplugged.

Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation. Remove the system unit cover if your motherboard is already installed in a chassis. Remove the bracket facing the slot that you intend to use. Keep the screws for later Gigabyte GV-AP64D ATI Graphics. Align the card connector with the slot and press firmly until the card is completely seated on the slot.

Fasten the card to the chassis with screws. Replace the system cover. For the detailed instruction, please refer to the document at the following path in the Support CD: Description Gigabyte GV-AP64D ATI Graphics pin2, pin3 to enable see p. If the jumpers JL1 and JR1 are short see the figure aboveboth the front panel and the rear panel audio connectors can work.

The data in CMOS includes system setup information such as system password, date, time, and system setup parameters. To clear and reset the system Gigabyte GV-AP64D ATI Graphics to default setup, please turn off the computer and unplug the power cord, then use a jumper cap to short the pins on CLRCMOS0 for 3 seconds.


Please rem ember to remove the jumper cap after clearing the CMOS. Do NOT place jumper caps over these headers and connectors.

Placing jumper caps over the headers and connectors will cause permanent damage of the motherboard! Make sure the red-striped side of the cable is plugged into Pin1 side of the connector.


Please refer to the instruction of your IDE device vendor for the details.

Related Posts